Renesas PG-FP6 V1.06

PG-FP6 V1.06 7. Usage of Communications Commands
R20UT4469EJ0800 Rev.8.00 Page 116 of 188
Oct.01.21
7.5.20 opb command
Sets the option bytes.
Input format
'opb'
Description of the function
Sets the option bytes.
Example of usage
Example of Communication Software Terminal Display
>opb
Set Option Bytes
PASS
Option Bytes operation finished.
7.5.21 otp command
Executes the OTP setting.
Input format
'otp'
Description of the function
Executes the OTP setting.
Remark: For details of OTP, refer to the user’s manual of the MCU.
Caution: Do not issue this command if you are using HCUHEX files.
Example of usage
Example of Communication Software Terminal Display
>otp
Set OTP protection
PASS
OTP operation finished.