Renesas PG-FP6 V1.06

PG-FP6 V1.06 7. Usage of Communications Commands
R20UT4469EJ0800 Rev.8.00 Page 86 of 188
Oct.01.21
7.4.4 downprm command
Downloads the parameter file.
Input format
'downprm'
<Parameter file data>
Description of the function
Downloads the parameter file to the FP6 main unit. Before executing the downset command, be sure to
execute the downprm command to download the parameter file. After executing the downprm command, the
setting file and program file data are cleared; so execute the downset and lod commands again.
7.4.5 downset command
Downloads the setting file.
Input format
'downset (‘fname=”filename”’)'
<Setting file data>
Description of the function
Downloads the setting file to the FP6 main unit.
Be sure to execute the downprm command before the downset command.
Be sure to execute the lod command after the downset command.
File names without options are not stored.
fname=”filename”:
Specifies the name of the setting file to be downloaded. The maximum number of characters is 50.
If 51 or more characters are specified, the first 50 characters are used.