Renesas PG-FP6 V1.06

PG-FP6 V1.06 7. Usage of Communications Commands
R20UT4469EJ0800 Rev.8.00 Page 99 of 188
Oct.01.21
7.4.17 sound command
Sets the buzzer.
Input format
'sound' ('off' | 'on')
Description of the function
Sets the buzzer. “Enabled” or “disabled” is optionally designated. If no option is designated, the current
setting is displayed.
off: Disables the buzzer.
on: Enables the buzzer.
Example of usage
Example of Communication Software Terminal Display
>sound
Sound is off
>sound off
Sound is off
>sound on
Sound is on