Renesas PG-FP6 V1.06

PG-FP6 V1.06 7. Usage of Communications Commands
R20UT4469EJ0800 Rev.8.00 Page 103 of 188
Oct.01.21
7.4.21 upprm command
Uploads the parameter file.
Input format
'upprm'
Description of the function
If the parameter file has been downloaded to an active programming area, executing this command will
upload the parameter file.
Example of usage
Example of Communication Software Terminal Display
>upprm
Press any key to start/continue output.
[FlashProParameterFile]
:
[CHECKSUM]
SUM=BA9F0491
[EOF]
7.4.22 upset command
Uploads the setting file.
Input format
'upset'
Description of the function
If the setting file has been downloaded to an active programming area, executing this command will upload
the setting file.
Example of usage
Example of Communication Software Terminal Display
>upset
Press any key to start/continue output.
[FlashproCustomerSettingFile]
:
[CHECKSUM]
SUM=F7D4A9E7
[EOF]