Renesas PG-FP6 V1.06

PG-FP6 V1.06 7. Usage of Communications Commands
R20UT4469EJ0800 Rev.8.00 Page 90 of 188
Oct.01.21
7.4.9 hlp command
Lists available commands with brief descriptions.
Input format
'hlp'
Description of the function
Lists available commands with brief descriptions.
Example of usage
Example of Communication Software Terminal Display
>hlp
-------------- Control commands --------------
downprm/downset : Download parameter/customer settings
upprm /upset : Upload parameter/customer settings
lod : Download Intel Hex or Motorola S-record file
hex/srec : Upload Intel Hex / Motorola S-record file
progarea : Change Program area
files : Show downloaded HEX/SREC files in FP6 memory
prm : Show Parameter file (PRM/SET) information
conf : Show / Modify FP6 configuration
brt : Set Baud rate to host
fcks : Calculate file checksum (FP6 memory)
ver : Show firmware version
res : Reset FP6
sound : Enable / Disable sound generation
trc : Show Device communication trace
selftest : Perform a Selfcheck
-------------- Device commands ---------------
bln : Blankcheck
ers : Erase
prg : Program
vrf : Verify
read : Read
ep : Erase and Program
sig : Show device signature
sum : Get device checksum
scf : Set security information