Renesas PG-FP6 V1.06

PG-FP6 V1.06 7. Usage of Communications Commands
R20UT4469EJ0800 Rev.8.00 Page 122 of 188
Oct.01.21
7.5.29 sig command
Executes the [Signature read] command.
Input format
'sig'
Description of the function
Executes the [Signature read] command.
Example of usage
Example of Communication Software Terminal Display
>sig
Device name: D70FXXXX
Device data: 10 DF 40
Device Version: 2.00
Firmware Version: 3.04
PASS
Signature operation finished.
7.5.30 slb command
Sets the Lock bit information.
Input format
'slb'
Description of the function
Sets the Lock bits on the MCU.
Example of usage
Example of Communication Software Terminal Display
>slb
Set LockBits
PASS
LockBits operation finished.