Renesas PG-FP6 V1.06

PG-FP6 V1.06 7. Usage of Communications Commands
R20UT4469EJ0800 Rev.8.00 Page 105 of 188
Oct.01.21
7.5 Description of FP6 Device Commands
7.5.1 bln command
Executes the blank check.
Input format
'bln'
Description of the function
Executes blank checking for the flash memory of the target device.
The area specified in operation mode is checked.
Example of usage
Example of Communication Software Terminal Display
>bln
[When the area is blank]
Blank check Block 000:
Blank check Block 001:
Blank check Block 002:
Blank check Block 003:
PASS
Blank check operation finished.
>bln
[When the area is not blank]
Blank check Block 000: ERROR
ERROR(E051): Not Blank.
Blank check operation finished.