Renesas PG-FP6 V1.06

PG-FP6 V1.06 7. Usage of Communications Commands
R20UT4469EJ0800 Rev.8.00 Page 115 of 188
Oct.01.21
7.5.18 gtm command
Gets the information of Trusted Memory.
Input format
'gtm'
Description of the function
Gets the information of Trusted Memory.
Remark: For details of Trusted Memory, refer to the user’s manual of the MCU.
Example of usage
Example of Communication Software Terminal Display
>gtm
Trusted Memory: FF
TMINF: FFFFFFFF
TM address: 00120060 00120064
PASS
Get Trusted Memory operation finished.
7.5.19 idc command
Executes the ID code setting.
Input format
'idc'
Description of the function
Executes the ID code setting.
Caution: Do not issue this command if you are using HCUHEX files.
Example of usage
Example of Communication Software Terminal Display
>idc
Set ID code
PASS
ID code operation finished.