Renesas PG-FP6 V1.06

PG-FP6 V1.06 7. Usage of Communications Commands
R20UT4469EJ0800 Rev.8.00 Page 81 of 188
Oct.01.21
7.3 Description of Commands
Each of the commands is described using the following format.
Command name
Presents an overview of the command.
Input format
Presents the input format for the command
Note
.
Description of the function
Describes the function of the command.
Example of usage
Presents an example of using the command.
Note: The symbols used to describe the input format are defined below.
Notation Description
Characters within single quotation marks ' ' Characters that must be input as displayed
Characters within angle brackets < >
Information that must be provided
Characters within parentheses ( ) Optional items
Options separated by vertical bars |
Options where only one option can be selected