Renesas PG-FP6 V1.06

PG-FP6 V1.06 7. Usage of Communications Commands
R20UT4469EJ0800 Rev.8.00 Page 114 of 188
Oct.01.21
7.5.16 got command
Gets the information of OTP.
Input format
'got'
Description of the function
Gets the information of OTP.
Remark: For details of OTP, refer to the user’s manual of the MCU.
Example of usage
Example of Communication Software Terminal Display
>got
OTP flags :
CF1: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
CF2: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
UB: FF
PASS
OTP operation finished.
7.5.17 gsc command
Gets the information of security.
Input format
'gsc'
Description of the function
Gets the security information set on the MCU.
Example of usage
Example of Communication Software Terminal Display
>gsc
Command protection: FF
PASS
Security operation finished.