Renesas PG-FP6 V1.06

PG-FP6 V1.06 7. Usage of Communications Commands
R20UT4469EJ0800 Rev.8.00 Page 124 of 188
Oct.01.21
7.5.33 sum command
Executes the Checksum command.
Input format
'sum'
Description of the function
Executes the Checksum command and gets checksum values in the MCU.
Example of usage
Example of Communication Software Terminal Display
>sum
Checksum: 0x1234
PASS
Checksum operation finished.
7.5.34 vrf command
Executes the Verify command.
Input format
'vrf'
Description of the function
Executes the Verify command.
Example of usage
Example of Communication Software Terminal Display
>vrf
Verify Chip:
10%
20%
:
100%
PASS
Verify operation finished.