Renesas PG-FP6 V1.06

PG-FP6 V1.06 7. Usage of Communications Commands
R20UT4469EJ0800 Rev.8.00 Page 113 of 188
Oct.01.21
7.5.14 gof command
Gets the information of OFS.
Input format
'gof'
Description of the function
Gets the information of OFS.
Remark: For details of OFS, refer to the user’s manual of the MCU.
Example of usage
Example of Communication Software Terminal Display
>gof
Get OFS
OFS: FFFFFFFF FFFFFFFF
PASS
Get OFS operation finished.
7.5.15 gos command
Gets the information of flash option.
Input format
'gos'
Description of the function
Reads and outputs the flash option information of the target device. When the read-disable setting is
effective, unreadable data are not output.
Example of usage
Example of Communication Software Terminal Display
>gos
OFS: FFFFFFFF FFFFFFFF
PASS
Get Option Setting operation finished.