Renesas PG-FP6 V1.06

PG-FP6 V1.06 7. Usage of Communications Commands
R20UT4469EJ0800 Rev.8.00 Page 123 of 188
Oct.01.21
7.5.31 spd command
Disables the serial programming.
Input format
'spd'
Description of the function
Disables the serial programming for the MCU.
Example of usage
Example of Communication Software Terminal Display
>spd
Set Serial Programming Disable
PASS
Set SerProgDis operation finished.
7.5.32 stm command
Sets the Trusted Memory.
Input format
'stm'
Description of the function
Enables the Trusted Memory setting.
Remark: For details of the Trusted Memory, refer to the user’s manual of the MCU.
Example of usage
Example of Communication Software Terminal Display
>stm
Set Trusted Memory
PASS
Set Trusted Memory operation finished.