Renesas PG-FP6 V1.06

PG-FP6 V1.06 7. Usage of Communications Commands
R20UT4469EJ0800 Rev.8.00 Page 120 of 188
Oct.01.21
7.5.25 rsc command
Executes the Security Release command.
Input format
'rsc'
Description of the function
Executes the Security Release command.
Remark: For details of the Security Release command, refer to the user’s manual of the MCU.
Example of usage
Example of Communication Software Terminal Display
>rsc
Release security
PASS
Release security operation finished.
7.5.26 scf command
Sets security information.
Input format
'scf'
Description of the function
Sets security information to the MCU.
Caution: Do not issue this command if you are using HCUHEX files.
Example of usage
Example of Communication Software Terminal Display
>scf
Set security Flags
PASS
Security operation finished.