Renesas PG-FP6 V1.06

PG-FP6 V1.06 7. Usage of Communications Commands
R20UT4469EJ0800 Rev.8.00 Page 88 of 188
Oct.01.21
7.4.7 files command
Displays the information concerning the program file, DLM key, and user key that were downloaded to the
FP6.
Input format
'files' (‘key’) ('check')
Description of the function
If no options are used, the information (file name, creation date, size, and checksum) concerning the
program file downloaded to the FP6 is displayed.
check:
The checksum of all programming areas stored in the program file, from START to END, is recalculated with
the 32-bit CRC method, and cross-checked with the checksum stored in the FP6 during download.
key:
Displays the data specified in key files without using a program file.
Example of usage
Example of Communication Software Terminal Display
Area Filename Date Time Range CRC<CR+LF>
*0 XXXXX.key xxxx xxxx SECDBG<CR+LF>
XXXX.key xxxx xxxx 00000000<CR+LF>
1 {invalid}<CR+LF>
2 XXXXXXXX.key xxxx xxxx 00002000<CR+LF>
3 XXX.key xxxx xxxx NONSECDBG<CR+LF>
4 {invalid}<CR+LF>
5 {invalid}<CR+LF>
6 {invalid}<CR+LF>
7 {invalid}<CR+LF>
>