Renesas PG-FP6 V1.06

PG-FP6 V1.06 7. Usage of Communications Commands
R20UT4469EJ0800 Rev.8.00 Page 100 of 188
Oct.01.21
7.4.18 speed_mode command
Adjusts the waiting time and timeout time for use in communications with the target device.
Input format
'wait_mode' ('middle' | 'low' | 'high' )
Description of the function
With devices of the V850 (except for V850E2) and 78K (except for 78K0S) family as the targets, this
command adjusts the waiting time and timeout time in communications with the target device according to
the following options. When no option is specified, the command is output with the currently specified mode.
middle: Normal mode (default)
Communications with the target device continue with the default timing.
low: Safe mode
A wait is inserted in communications processing to improve the stability of the connection. An unstable
connection may become stable in the safe mode; however, processing times will be delayed.
high: Fast mode
This mode accelerates communications processing relative to the default value. While fast mode accelerates
processing in many cases, it may cause the connection to fail. This depends on the target device and the
environment.
Example of usage
Example of Communication Software Terminal Display
>speed_mode
speed mode is middle.