Renesas PG-FP6 V1.06

PG-FP6 V1.06 7. Usage of Communications Commands
R20UT4469EJ0800 Rev.8.00 Page 109 of 188
Oct.01.21
7.5.7 ers command
Executes the Erase command.
Input format
'ers'
Description of the function
Erases the target flash memory.
The range specified in operation mode is to be erased.
If this command is executed with the “Erase Chip” specified, initialization of flash options is also executed.
Example of usage
Example of Communication Software Terminal Display
>ers
Blank check Skipped.
Erase Chip:
PASS
Erase operation finished.
7.5.8 ers_chip command
Initializes an MCU of the RA family.
Input format
'ers_chip'
Description of the function
Initializes an MCU of the RA family.
Example of usage
Example of Communication Software Terminal Display
>ers_chip
Erase Chip
PASS
Erase Chip operation finished.