PG-FP6 V1.06 7. Usage of Communications Commands
R20UT4469EJ0800 Rev.8.00 Page 85 of 188
Oct.01.21
3 R7F701708 92AC1CBE PR5
test-3.es6 A43294EC ESF
4 {invalid} PR5
{invalid} ESF
5 {invalid} PR5
{invalid} ESF
6 {invalid} PR5
{invalid} ESF
7 {invalid} PR5
{invalid} ESF
AutoCon is on
Sound is on
EP mode: Standard
speed mode is middle.
Security state is: Inactive
Boot protection: disabled
Max authentication number: 0
Current number of password authentication: 0
Current number of boot authentication: 0
Limit of ep/prg executions: disabled
Remain number of ep/prg executions: 0
Encrypt downloaded data: disabled
Encrypt file password: disabled
Manager flags: 0x00000100
HEX file Upload enabled
Device Setup enabled
Unique Code disabled
Read Command enabled
Manager option byte: 0x00
HEX file Upload enabled
Device Setup enabled
Checksum comparison off
File range check is off