EasyManua.ls Logo

Renesas PG-FP6 V1.06

Renesas PG-FP6 V1.06
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PG-FP6 V1.06 Precautions for Safety
R20UT4469EJ0800 Rev.8.00 Page 8 of 188
Oct.01.21
WARNING
Warnings for Power Supply:
If the power cable of the power adapter that comes with the product does not fit the receptacle, do not
alter the power cable and do not plug it forcibly. Failure to comply may cause electric shock and/or fire.
Use a power cable which complies with the safety standard of the country.
Do not touch the plug of the power cable when your hands are wet. This may cause electric shock.
This product is connected signal ground with frame ground. If yours developing product is transform-less
(not having isolation transformer of power), this may cause electric shock. Also, this may give an un-
repairable damage to this product and your developing product.
While developing, connect power of the product to commercial power through isolation transformer in
order to avoid these dangers.
To eliminate differences in potential between the grounds of this product and of the user system, only
connect the plug of the power cable to the outlet after connecting this product and the user system.
If other equipment is connected to the same branch circuit, care should be taken not to overload the
circuit.
If you smell a strange odor, hear an unusual sound, or see smoke coming from this product, then
disconnect power immediately by unplugging the power cable from the outlet.
Do not use this as it is because of the danger of electric shock and/or fire. In this case, contact your local
distributor.
Before setting up this product and connecting it to other devices, turn off power or remove a power cable
to prevent injury or product damage.
Warnings to Be Taken for Handling:
Do not modify this product. Personal injury due to electric shock may occur if this product is modified.
Modifying the product will void your warranty.
Warning for Installation:
Do not set this product in water or areas of high humidity. Spilling water or some other liquid into the
product may cause un-repairable damage.
Warning for Use Temperature:
The maximum allowable ambient temperature for using this product is 35 ˚C. Care should be taken that a
maximum ambient temperature is not exceeded when this product is to be used.

Table of Contents

Related product manuals