REXROTH IndraDrive C - Page 297

Rexroth IndraDrive Index 20-1
DOK-INDRV*-SYSTEM*****-PR02-EN-P
20 Index
A
additional capacitors as energy store 15-6
additional recommendations on cable routing 7-27
allowed mounting positions 7-1
allowed operating data 8-7
allowed operating data of mains filters 15-16
ambient conditions 5-4
applications 4-1
applied-overvoltage withstand test 5-2
Appropriate use 2-1
Appropriate uses
Uses 2-2
arrangement from electrical point of view 7-20
arrangement from mechanical point of view 7-1
arrangement from thermal point of view 7-17
arrangement of additional components 7-20
arranging components and lines 7-25
arranging the components in the control cabinet 7-1, 7-24
arranging the mains contactor 11-1
B
basic accessories HAS01 14-3
basic design of the devices 1-12
Battery safety 3-11
Bb contact 11-1
Bonding Conductor 7-31
boring dimensions for the mounting plate 7-9
box with project planning manuals 1-4
braking behavior 15-18
braking resistor and DC bus continuous power
calculate 15-13
branch to synchronization input HMV01.1R 13-7
brief description 4-1
bus cable RKB0001 14-60
C
cable
replace 16-3
cable routing of the interference-free lines to the mains connection 7-24
calculating available braking resistor and DC bus continuous power 15-13
calculating inrush current 15-10
calculating mains-side phase current 15-10
calculations for mains connection 15-10
capacitance data 19-2
capacitances against ground 19-1
capacitor pack 14-49
capacity utilization 5-5
causes of noise emission 8-3
CE 8-1
CE label 5-1
central supply HCS 9-8
central supply HCS02 with HCS02 6-7
central supply HCS02 with HMS / HMD 6-9
central supply HCS03 6-8
central supply HCS03 withHMS / HMD 6-11
central supply HMV01 6-4
characteristic 13-1
combination HCS03 with HMS / HMD 6-11
combinations that are not allowed 6-12
commutation drops 10-8
compact converters 1-10
compatibility with foreign matters 5-5