Enter a user code using up to eight digits. A user code identifies a group of users and allows you to check
the number of sheets printed under each code with SmartDeviceMonitor for Admin.
The following table shows the tabs or menus where you can select this function.
Windows 2000 / XP / Vista, Windows Server
2003 / 2003 R2
Select [Enabled] on [Log], and then enter a user
code in the [User Code:] box on the [Job/Log] tab
in the Printing Preferences dialog box.
Mac OS
Select the [Enable User Code] check box, and then
enter a user code in the [User Code] box on [Job
Log] in the print dialog box.
Mac OS X
Select the [Enable User Code] check box, and then
enter a user code in the [User Code] box on [Job
Log] in the print dialog box.
• For details about using SmartDeviceMonitor for Admin, see Help.
Paper Size
Use this to select the size of paper you want to use.
The following table shows the tabs or menus where you can select this function.
Windows 2000 / XP / Vista, Windows Server
2003 / 2003 R2
[Paper Size:] on [Paper Options] on the [Paper/
Quality] tab in the Printing Preference dialog box.
Mac OS
[Paper:] on the [Page Attributes] tab in the Page
Setup dialog box.
Mac OS X [Paper Size:] in the Page Setup dialog box.
• For details about the paper sizes supported by this machine, see General Setting Guide.
Fit to Paper
When the size of the document and paper size differ, set whether or not to print according to paper size.
Printing a Document
85
To Next Page
Loading...
Need help?
General
