Registering Folders
This section describes the procedure for registering, changing, and deleting folders.
By registering a shared folder, you can send scan files or received fax documents to it directly.
There are three types of protocol you can use:
• SMB
For sending files to shared Windows folders.
• FTP
Use when sending files to an FTP server.
• NCP
Use when sending files to a NetWare server.
• For details about protocols, server names, and folder levels, consult your network administrator.
• You can prevent unauthorized users from accessing folders from the machine. See "Registering a
Protection Code".
• You can only select either SMB, FTP, or NCP. If you change protocol after finishing your settings, all
previous entries are cleared.
• p.303 "Registering a Protection Code"
Registering an SMB Folder
This section describes how to register an SMB folder.
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Press [Administrator Tools].
5. Registering Addresses and Users for Facsimile/Scanner Functions
276
To Next Page
Loading...
Need help?
General
