7. Press [Programmed User/Group].
All the names registered will be displayed.
8. Press [OK].
9. Press [Exit].
10. Press the [User Tools/Counter] key.
Removing a Name from a Group
This section describes how to remove a name from a group.
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [Address Book Management].
5. Check that [Program / Change] is selected.
6. Select the name to remove from a group.
Press the name key, or enter the registered number using the number keys.
You can search by the registered name, fax number, folder name, e-mail address, or IP-Fax
destination.
7. Press [Add to Group].
5. Registering Addresses and Users for Facsimile/Scanner Functions
298
To Next Page
Loading...
Need help?
General
