Login (Using Web Image Monitor)
This section explains how to log on to the machine via Web Image Monitor.
1. Click [Login] on the top page of the Web Image Monitor.
2. Enter a login user name and password, and then click [Login].
• For user code authentication, enter a user code in "User Name", and then click [Login].
Log Off (Using Web Image Monitor)
1. Click [Logout] to log off.
• Delete the cache memory in the Web Image Monitor after logging off.
User Lockout Function
If an incorrect password is entered several times, the User Lockout function prevents further login attempts
under the same user name. Even if the locked out user enters the correct password later, authentication will
fail and the machine cannot be used until the lockout period elapses or an administrator or supervisor
disables the lockout.
To use the lockout function for user authentication, the authentication method must be set to Basic
authentication. Under other authentication methods, the lockout function protects supervisor and
administrator accounts only, not general user accounts.
Lockout setting items
The lockout function settings can be made using Web Image Monitor.
Setting Item Description Setting Values Default Setting
Lockout
Specify whether or not
to enable the lockout
function.
• Active
• Inactive
• Inactive
Number of Attempts
Before Lockout
Specify the number of
authentication
attempts to allow
before applying
lockout.
1-10 5
If User Authentication is Specified
85
To Next Page
Loading...
Need help?
General
