Setting of Original Feed Type
This section explains Original Feed Type settings such as orientation and scan sides of originals.
Original Orientation
This section explains how to correctly display the top/bottom orientation of scanned originals on a client
computer screen.
1. Press [Original Feed Type].
2. Press [ ] or [ ] to select the same orientation as that of original.
3. Press [OK].
Placing Originals
To correctly display the top/bottom orientation of the scanned original on a client computer, the placement
of the original and the settings made on the control panel must match.
Place originals correctly by referring to the following table:
Exposure Glass
Original orientation Control Panel Key
top edge touches top left corner of exposure glass
top edge touches rear of exposure glass
Setting of Original Feed Type
157