Ricoh Aficio MP C5000 Function Guide

4. If the last page of the last original is blank, in [Last Page], select [1 Side] or [2 Sides].
To skip the last page, select [1 Side].
To scan the last page as blank page, select [2 Sides].
5. Press [OK].
• If you selected [Divide], the setting made here is applied to the last page of each batch of divided
originals.
Stamp
This section explains the procedure for stamping originals that are scanned from the ADF. The stamp
indicates the originals have been scanned.
When scanning a document using ADF, the machine can stamp a circle mark at the bottom of the original.
When scanning a two-sided document, the document is marked at the bottom of the front page and top
of the rear page.
This function is useful when you want to distinguish scanned originals.
BCS002S
1. Press [Original Feed Type].
2. Press [Stamp].
8. Various Scan Settings
160
8

Ricoh Aficio MP C5000 Specifications

General

Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Resolution	200 x 200 dpi
Duplex Printing	Yes
Max Document Enlargement	400%
Max Document Reduction	25%
Print Speed	50 ppm
Resolution	1200 x 1200 dpi
Copy Speed	50 cpm
Paper Capacity	Maximum: 4, 400 sheets
Scanner Type	Flatbed, ADF
Connectivity	USB, Ethernet
Operating System Compatibility	Windows, Mac