• If you do not specify a comment, current setting is displayed.
Presentation URL configuration
msh> wsmfp url “URL”
• Ebter the URL string in the “URL”.
WSD (Device) TCP port configuration
msh> wsmfp devport “port_number”
• The Default is 53000.
WSD (Printer) TCP port configuration
msh> wsmfp prnport “port_number”
• The Default is 53001.
WSD (Printer) Timeout configuration
msh> wsmfp prntimeout [30-65535]
• The default is 900 seconds.
WSD (Scanner) TCP port configuration
msh> wsmfp scnport “port_number”
• The Default is 53002.
Comment initialization
msh> wsmfp clear comments
Location initialization
msh> wsmfp clear location
Presentation URL initialization
msh> wsmfp clear url
8021x
Use "8021x" commands to display IEEE 802.1x related information.
View settings
msh> 8021x
Configuration
msh> 8021x "parameter"
Parameter Value configured
eap {tls|ttls|leap|peap} {chap|mschap|
mschapv2|pap|md5|tls}
You can specify the EAP authentication type.
tls: EAP-TLS (default)
Remote Maintenance by telnet
201
To Next Page
Loading...
Need help?
General
