• Check the machine's IPv4 address and subnet mask, or the IPv6 address settings.
• For details about how to set the IPv4 address and subnet mask from the control panel of the machine,
see "Interface Settings".
• Before using this machine with a wireless LAN interface, you must select [Wireless LAN] in [LAN Type].
• p.33 "Interface Settings"
Setup Procedure
This section describes how to setup wireless LAN interface.
Set up wireless LAN according to the following procedure:
• Select [802.11 Ad-hoc Mode] when connecting Windows XP as a wireless LAN client using Windows
XP standard driver or utilities, or when not using the infrastructure mode.
• When [802.11 Ad-hoc Mode] is selected in Communication mode, select the channel for [Ad-hoc
Channel]. Set a channel that matches the type of wireless LAN being used. For details about setting
the Ad-hoc Channel, see "Interface Settings ".
Connecting to the Interfaces
73
To Next Page
Loading...
Need help?
General
