11. Click [Next >].
Select the [Yes] check box to configure the printer as default.
12. Click [Finish].
Restart the computer to complete installation.
• A user code can be set after the printer driver installation. For information about user code, see the
printer driver Help.
• Auto Run may not work with certain operating system settings. In that case, launch “Setup.exe” on
the CD-ROM root directory.
Installing the PostScript 3 Printer Driver (Windows Vista)
• Installing this printer driver requires Administrators permission. Log on using an account that has
Administrators permission.
• If you print from a print server connected to the printer using the DeskTop Binder-
SmartDeviceMonitor port, the client cannot use Recovery Printing and Parallel Printing.
• If you print with a Windows Vista print server, DeskTop Binder-SmartDeviceMonitor notification
functions may not be possible for the client.
• You can install the printer driver from the CD-ROM provided with this machine or download it from
the supplier's Web site.
• If your operating system is Windows Vista x64, you must download the printer driver from the
manufacturer's Web site. Select this printer and the operating system you are using, and then
download it.
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
The default interface language is English.
The printer driver with the selected language will be installed. The English printer driver is installed
when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian,
Catala, Turkce.
4. Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
5. Click [A network printer, or a printer attached to another computer].
1. Windows Configuration
32
To Next Page
Loading...
Need help?
General
