About the Scanner Functions
This section describes functions you can use in the scanner mode.
You can use the scanner functions to send scan files to computers, scan originals from a computer using
the TWAIN driver, or store scan files on the machine's hard disk.
For details about each function, see respective chapters.
Sending scanned files (Network Scanner)
Scan files can be sent to or stored on a computer, and you can specify the format of a scan file
according to how the file will be used.
• Sending by e-mail
You can send scan files to specified e-mail addresses.
For details, see chapter 1 "Sending Scan Files by E-mail".
• Sending to folders
Scan files can be stored in shared network folders, or on FTP or Netware servers.
For details, see chapter 2 "Sending Scan Files to Folders".
• Sending using WSD
You can use Web Services on Devices (WSD) to send scan files to a client computer.
For details, see chapter 3 "Sending Scan Files Using WSD".
• Delivering
You can deliver scan files using a delivery server.
For details, see chapter 6 "Delivering Scan Files".
Scanning originals from a client computer (TWAIN Scanner)
You can use the TWAIN driver to scan files from a networked or directly connected computer.
For details, see chapter 7 "Scanning Originals with the Network TWAIN Scanner".
Storing files
Scan files can be stored on the machine's hard disk or saved on a removable memory device.
• Storing files on the machine's hard disk
You can do various things with files that are stored on the hard disk, such as save them in shared
folders or send them by e-mail.
For details, see chapter 4 "Storing Files Using the Scanner Function".
• Saving files on a removable memory device
You can save scan files on a removable memory device such as a USB memory stick or an SD
card.
For details, see chapter 5 "Saving Scan Files on a Removable Memory Device".
13
To Next Page
Loading...
Need help?
General
