Using as the NetWare Print Server / Remote
Printer
When using the PostScript 3 Printer Driver
• In an IPv6 environment, Netware servers cannot be used.
Follow the procedure below to set up the PostScript 3 printer driver.
1. In the [Printers] or [Printers and Faxes] window, open the printer properties.
2. Click the [PostScript] tab.
When using Windows 2000 / XP / Vista or Windows Server 2003 / 2003 R2, click the [Device
Settings] tab, and then proceed to step to clear the check box.
3. Click [Advanced].
4. Clear the [Send CTRL+D before job] and [Send CTRL+D after job] check boxes, and then click
[OK].
5. Click [OK] to close the printer properties dialog box.
Using as the NetWare Print Server / Remote Printer
35
To Next Page
Loading...
Need help?
General
