Messages Description
Setting Remotely The RDS setting is being processed.
Skipped due to Error Skipped the error.
Storage Complete The storage is complete.
Storage Failed The storage has failed.
Supplies Order Call failed The supply order call has failed.
Suspend / Resume Key Error Finisher stop button was pressed.
Transmission Aborted The transmission was interrupted.
Transmission Complete The transmission completion was completed.
Transmission Failed The transmission has failed.
Tray Error: Chaptering The paper feed tray specification error has
occurred because chaptering as well as the normal
paper use the same tray for printing.
Tray Error: Duplex Printing Selected paper tray cannot be used for duplex
printing.
Unit Left Open: ADF Document feeder is opened.
Waiting for Job Suspension The machine is waiting for Job Suspension.
Warming Up... The machine is warming up.
• For details about UNIX commands, see UNIX Supplement.
• Check the error contents that may be printed in the configuration page.
Printer configuration
You can check the printer configuration using telnet.
This section explains the checking procedure for input/output tray and printer language.
• UNIX: Use the “info” command and “rsh”, “rcp”, “ftp”, and “sftp” parameters.
• mshell: Use the “info” command.
Getting Printer Information over the Network
215
To Next Page
Loading...
Need help?
General
