8. Press [Select Line], and then select [H.323] or [SIP].
9. Press [Change] under "Fax Destination".
10. Enter the IP-Fax destination.
11. Press [OK].
12. Press [OK].
13. Press [Exit].
14. Press the [User Tools/Counter] key.
• To register the name, see "Registering Names".
• p.245 "Registering Names"
Changing a Registered IP-Fax Destination
This section describes how to change an IP-Fax Destination.
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [Address Book Management].
5. Registering Addresses and Users for Facsimile/Scanner Functions
266