Values of Various Set Items for Transmission/
Storage/Delivery Function
This section explains the values of various transmission/storage/delivery function settings.
• Depending on the type or settings of the file or original, you may not be able to specify the destination
or enter the maximum number of characters stated below.
Transmission Function
This section explains the values of transmission function settings.
Sending e-mail
The following table tells you the maximum values of the e-mail sending function settings.
Values of Set Items for Sending by E-mail
Item Maximum value Comments
Number of subject line
characters
128 alphanumeric characters -
Number of e-mail message
characters
• Selecting from the list:
400 alphanumeric
characters (80
alphanumeric characters
5 lines)
• Entering manually: 80
alphanumeric characters
You cannot enter messages from
the list and manually at the same
time.
Number of e-mail address
characters
128 alphanumeric characters
E-mail addresses found via LDAP
server search cannot be selected
if they contain more than 128
characters.
Number of addresses you can
specify at the same time
500 addresses
You can specify 100
destinations by direct entry,
including LDAP search. Select
the remaining 400 destinations
from registered addresses.
Values of Various Set Items for Transmission/Storage/Delivery Function
197
To Next Page
Loading...
Need help?
General
