Installing the Printer Driver Using USB
This section explains how to install printer drivers using USB.
• Make sure that machine is connected to the computer's USB ports using the USB interface cable.
• Before installing, check that only the operating system is running on the computer and no print jobs
are in progress.
• The printer drivers can be installed from the CD-ROM provided with this machine.
• You can install the printer driver from the CD-ROM provided with this machine or download it from
the supplier's Web site.
• If your operating system is Windows XP Pro x64, Windows Vista x64, or Windows Server 2003 /
2003 R2 x64, you must download the printer driver from the manufacturer's Web site. Select this
printer and the operating system you are using, and then download it.
Windows 2000 - USB
• Installing a printer driver requires Administrators permission. Log on using an account that has
Administrators permission.
If the printer driver has already been installed, plug and play is enabled, and the icon of the printer
connected to the “USB” port is added to the [Printers] window.
If the printer driver is not installed, follow the plug-and-play instructions of the printer to install it from the
CD-ROM provided.
1. Connect the machine to the computer using the USB cable.
Connect the USB cable firmly.
2. In the Found New Hardware Wizard display, click [Search for a suitable driver for my device
[recommended]], and then click [Next >].
3. Select the [Specify location] check box, and then click [Next >].
4. Insert the CD-ROM into the CD-ROM drive.
5. When Auto Run starts, click [Exit].
To disable Auto Run, press the left [Shift] key when inserting the CD-ROM into the drive and keep it
pressed until the computer finishes reading from the CD-ROM.
6. Specify the location where the source files of the printer driver is stored.
If the CD-ROM drive is D, the source files of the printer driver are stored in the following location:
• PostScript 3
1. Windows Configuration
36
To Next Page
Loading...
Need help?
General
