Using a Registration Number to Specify a Sender Name
Select the sender using the registration numbers specified by users in the machine's address book.
1. Press [Sender Name].
2. Press [Registration No.].
3. Using the number keys, enter the five-digit registration number assigned to the required
destination.
If the entered number is less than five digits, press the [ ] key after the last number.
Example: To enter 00006
Press the [6] key, and then press the [ ] key.
By pressing [Change], you can change the selected destination.
4. Press [OK] twice.
Selecting the Sender by Searching the Machine's Address Book
This section explains how to select the sender by searching the machine's address book.
1. Press [Sender Name].
2. Press [Search].
Specifying the E-mail Sender
41
To Next Page
Loading...
Need help?
General
