7. Scanning Originals with the Network
TWAIN Scanner
Before Using the Network TWAIN Scanner
This section describes the preparations and procedure for using the network TWAIN scanner.
The TWAIN driver allows you to scan originals on the machine from a client computer via the network.
• To use the network TWAIN scanner, you must install the TWAIN driver, which is on the supplied CD-
ROM. For details about installing the TWAIN driver, see "Installing the TWAIN Driver from the
Supplied CD-ROM".
• To use the network TWAIN scanner, a TWAIN-compliant application, such as DeskTopBinder, must
be installed on the client computer. DeskTopBinder Lite is on the supplied CD-ROM. For details about
installing DeskTopBinder Lite, see "Installing DeskTopBinder Lite from the Supplied CD-ROM".
• p.140 "Installing the TWAIN Driver from the Supplied CD-ROM"
• p.120 "Installing DeskTopBinder Lite from the Supplied CD-ROM"
Overview of the Network TWAIN Scanner
This section describes the network TWAIN scanner function.
In the TWAIN scanner mode, you can share this machine among multiple computers. Therefore, you don't
have to prepare a special computer for scanner or reconnect the scanner and each computer every time
you need to use it.
To Next Page
Loading...
Need help?
General
