Simultaneous Storage and Delivery
This section explains how to store a file and simultaneously deliver it.
1. Press [Store File].
2. Make sure that [Store to HDD + Send] is selected.
3. If necessary, specify the stored file's information, such as [User Name], [File Name], and
[Password].
For details, see "Specifying File Information for a Stored File".
4. Press [OK].
5. Specify the setting for delivering the file, and then send the file.
For details about delivering a file, see "Basic Procedure for Delivering Files".
• Depending on the security setting, [Access Privileges] may appear instead of [User Name]. For
details about specifying [Access Privileges], consult the administrator.
• You can resend stored files. To resend stored files, select the files on the Select Stored File screen,
and then send them. For details, see "Sending a Stored File".
• p.97 "Specifying File Information for a Stored File"
• p.123 "Basic Procedure for Delivering Files"
• p.106 "Sending a Stored File"
6. Delivering Scan Files
136
To Next Page
Loading...
Need help?
General
