General Settings
This section describes the user tools on the [General Settings] tab in [Scanner Features].
Default settings are shown in bold type.
Switch Title
Select the title to be shown on the destination list.
The default setting is Title 1.
Update Delivery Server Destination List
Press [Update Delivery Server Destination List] to update the receivers from the delivery server. To use
this function, it is necessary to set [Delivery Option] to [On].
For details about "Delivery Option", see "File Transfer", Network and System Settings Guide.
Search Destination
Select a destination list to be used in "Search Destination". To search from LDAP server, it is necessary
to register the LDAP server in [System Settings] and set [LDAP Search] to [On].
The default setting is Address Book.
For details about "LDAP Search", see "Administrator Tools", Network and System Settings Guide.
TWAIN Standby Time
If the machine receives a TWAIN scanning request while it is writing data to memory or performing
e-mail, Scan to Folder, network delivery, or WSD scanning jobs, it switches to the network TWAIN
scanner function either immediately or after a specified standby time elapses following the last key
operation.
Use this setting to select whether the machine switches to TWAIN immediately or waits until the standby
time elapses when it receives a TWAIN scanning request.
The default setting is Set Time, 10 second(s).
If you select [Immediate], the machine will switch to the network TWAIN scanner function immediately.
If you select [Set Time], enter a standby time using the number keys (3-30 seconds). The machine will
switch to the network TWAIN scanner function when the time set here elapses following the last key
operation.
Destination List Display Priority 1
Select a destination list to be displayed when the machine is in the initial state.
You can select [E-mail / Folder], [Delivery Server], or [WSD].
The default setting is Delivery Server.
Destination List Display Priority 2
In the machine's address book, select which address book appears by default.
You can select either [E-mail Address] or [Folder].
General Settings
183
To Next Page
Loading...
Need help?
General
