Switching to the E-mail Screen
This section explains how to switch the screen to the E-mail screen.
If the Scan to Folder screen is being displayed, press [E-mail] to switch to the E-mail screen.
If the network delivery scanner screen is being displayed, switch to the E-mail screen as follows:
1. Press [Delivery Dest.].
The E-mail screen or Scan to Folder screen appears.
2. If the Scan to Folder screen appears, press [E-mail].
The E-mail screen appears.
• You cannot switch from the network delivery scanner screen or other screens while destinations
are being specified. To clear the specified destination, display the destination in the destination
field, and then press the [Clear/Stop] key.
• If you are scanning files using WSD, [Swtch Dest.List] or [WSD Dest.] appears instead of [Delivery
Dest.]. To switch to the E-mail screen, press [Swtch Dest.List], and then, on the screen that appears,
press [E-mail / Folder], or press [WSD Dest.].
1. Sending Scan Files by E-mail
30
To Next Page
Loading...
Need help?
General
