4. Press [Address Book Management].
5. Check that [Program / Change] is selected.
6. Select the name whose folder you want to register.
Press the name key, or enter the registered number using the number keys.
7. Press [Auth. Info], and then press [ Next].
8. Press [Specify Other Auth. Info] on the right side of Folder Authentication.
When [Do not Specify] is selected, the SMB User Name and SMB Password that you have specified
in Default User Name/Password (Send) of File Transfer settings applies.
9. Press [Change] under "Login User Name".
10. Enter the login user name, and then press [OK].
11. Press [Change] under "Login Password".
12. Enter the password, and then press [OK].
13. Enter the password again to confirm, and then press [OK].
14. Press [Folder].
15. Press [SMB].
To specify a folder, you can either enter the path manually or locate the folder by browsing the
network.
16. Specify the path.
For details about how to specify the path manually, see "Locating the SMB folder manually".
Registering Folders
277
To Next Page
Loading...
Need help?
General
