1. Destination Field
The specified destination appears. If more than one destination has been specified, press [ ] or [ ] to scroll
through the destinations.
2. Network delivery scanner icon
Indicates that the network delivery scanner screen is displayed.
3. [Reg. No.]
Press this key to specify the destination using a 3-digit registration number.
4. [Manual Entry]
To send a file by e-mail via the delivery server to a destination not registered in the delivery server's Destination
List, press this key to display the soft keyboard. Then use the soft keyboard to enter the e-mail address. For details
about how to send a file by e-mail via the delivery server, see ScanRouter delivery software manual.
5. Destination List
The list of destinations registered in the delivery server appears. If all of the destinations cannot be displayed,
press [ ] or [ ] to switch the screen.
The ( ) symbol indicates a group destination.
6. [Subject] [Sender Name] [Recept. Notice]
Specify the subject, sender, and whether or not to enable Message Disposition Notification for the file to be
transmitted.
6. Delivering Scan Files
122
To Next Page
Loading...
Need help?
General
