Relationship of original of mixed sizes and scan size
This section explains differences you need to be aware of when scanning originals of different length (such
as A3 & A4 or B4 & B5) using the original position setting and size.
• If you select [Mixed Original Sizes], the machine detects the length of each original and scans them.
• If a template size is selected, the machine scans originals at the selected size regardless of the actual
size of originals. If an original is smaller than the selected size, the machine applies margins to the
scan area.
• If [Auto Detect] is selected for scanning originals from the exposure glass, the machine detects the
size of individual originals and scans accordingly.
• If only [Auto Detect] is selected for scanning originals from the ADF, the machine detects the size of
the first original and scans all the other originals based on that size.
• When scanning originals of different length at the same time, place them correctly by referring to the
chart below. The paper guides cannot be adjusted to small size originals, which may cause slightly
tilted scanning.
Setting procedure of a custom size when scanning an entire original
This section explains how to specify a custom size for scanning the entire area of an original.
To display the custom size setting screen, on the initial scanner screen, press [Scan Settings] > [Scan Size]
> [Custom Size].
The following custom size original is used to explain the method for specifying the scan settings on the
custom size setting screen.
8. Various Scan Settings
150
To Next Page
Loading...
Need help?
General
