5. If necessary, press [Division Check].
When you select [Division Check], if the originals were not scanned in order due to a paper jam or
multi-sheet feed, a screen for stopping or continuing scanning appears at the end of the scan.
6. Press [OK] twice.
The current settings are displayed.
• If the last page of a batch of divided two-sided originals is blank, you can skip that page. To
skip scanning, in [Last Page] under [2 Sided Original], select [1 Side]. To scan the last page as
a blank page, select [2 Sides]. For details, see "Two-sided original".
• p.159 "Two-sided original"
Setting of Original Feed Type
163
To Next Page
Loading...
Need help?
General
