Paper Type: Bypass Tray
Sets the display so you can see what type of paper is loaded in the bypass tray.
The paper types you can set for the bypass tray are as follows:
• [No Display], [Recycled Paper], [Color Paper], [Letterhead], [Label Paper], [Preprinted Paper],
[Bond Paper], [Cardstock], [OHP (Transparency)], [Special Paper 1], [Special Paper 2],
[Special Paper 3], [Envelope], [Coated Paper], [Coated Paper: Gloss]
The paper thicknesses you can set for the bypass tray are as follows:
• [Thin Paper] (52.0 - 59.0 g/m
2
, 14.0 - 16.0 lb.)
• [Plain Paper] (60.0 - 90.0 g/m
2
, 16.0 - 24.0 lb.)
• [Middle Thick] (91.0 - 105.0 g/m
2
, 24.0 - 28.0 lb.)
• [Thick Paper 1] (106.0 - 169.0 g/m
2
, 28.0 - 45.0 lb.)
• [Thick Paper 2] (170.0 - 220.0 g/m
2
, 45.0 - 58.5 lb.)
• [Thick Paper 3] (221.0 - 256.0 g/m
2
, 59.0 - 68.0 lb.)
The default setting for "Paper Type" is [No Display].
The default setting for "Paper Thickness" is [Plain Paper].
For details about the relations between possible paper sizes and thickness, see "Recommended Paper
Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This
Machine.
Paper Type: Tray 1
Sets the display so you can see what type of paper is loaded in the paper tray 1.
The print function uses this information to automatically select the paper tray.
The paper types you can set for the paper tray 1 are as follows:
• [No Display], [Recycled Paper], [Color Paper], [Letterhead], [Preprinted Paper], [Bond Paper],
[Cardstock], [Special Paper 1], [Special Paper 2], [Special Paper 3], [Coated Paper: Gloss]
The paper thicknesses you can set for the paper tray 1 are as follows:
• [Plain Paper] (60.0 - 90.0 g/m
2
, 16.0 - 24.0 lb.)
• [Middle Thick] (91.0 - 105.0 g/m
2
, 24.0 - 28.0 lb.)
• [Thick Paper 1] (106.0 - 169.0 g/m
2
, 28.0 - 45.0 lb.)
• [Thick Paper 2] (170.0 - 220.0 g/m
2
, 45.0 - 58.5 lb.)
• [Thick Paper 3] (221.0 - 256.0 g/m
2
, 59.0 - 68.0 lb.)
The default setting for "Paper Type" is [No Display].
The default setting for "Paper Thickness" is [Plain Paper].
The default setting for" Apply Duplex" is [Yes].
1. System Settings
26
To Next Page
Loading...
Need help?
General
