The print function uses this information to automatically select the paper tray.
The paper types you can set for the paper tray 3 - 4 (when the lower paper trays are installed) are
as follows:
• [No Display], [Recycled Paper], [Color Paper], [Letterhead], [Preprinted Paper], [Bond Paper],
[Cardstock], [Special Paper 1], [Special Paper 2], [Special Paper 3], [Coated Paper], [Coated
Paper: Gloss]
The paper thicknesses you can set for the paper tray 3 - 4 (when the lower paper trays are installed)
are as follows:
• [Plain Paper] (60.0 - 90.0 g/m
2
, 16.0 - 24.0 lb.)
• [Middle Thick] (91.0 - 105.0 g/m
2
, 24.0 - 28.0 lb.)
• [Thick Paper 1] (106.0 - 169.0 g/m
2
, 28.0 - 45.0 lb.)
• [Thick Paper 2] (170.0 - 220.0 g/m
2
, 45.0 - 58.5 lb.)
• [Thick Paper 3] (221.0 - 256.0 g/m
2
, 59.0 - 68.0 lb.)
The default setting for "Paper Type" is [No Display].
The default setting for "Paper Thickness" is [Plain Paper].
The default setting for "Apply Duplex" is [Yes].
The default setting for "Apply Auto Paper Select" is [Yes].
The key mark is displayed next to the paper tray if [No] is selected in "Apply Auto Paper Select".
"Apply Auto Paper Select" can only be selected for the copier function if [No Display] and [Recycled
Paper] are selected. If [No] is selected, "Apply Auto Paper Select" is not valid.
For details about the relations between possible paper sizes and thickness, see "Recommended Paper
Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This
Machine.
Paper Type: Tray 3 (when the LCT is installed)
Sets the display so you can see what type of paper is loaded in the paper tray 3 (when the LCT is
installed).
The print function uses this information to automatically select the paper tray.
The paper types you can set for the paper tray 3 (when the LCT is installed) are as follows:
• [No Display], [Recycled Paper], [Color Paper], [Letterhead], [Preprinted Paper], [Bond Paper],
[Cardstock], [Special Paper 1], [Special Paper 2], [Special Paper 3], [Coated Paper], [Coated
Paper: Gloss]
The paper thicknesses you can set for the paper tray 3 (LCT) are as follows:
• [Plain Paper] (60.0 - 90.0 g/m
2
, 16.0 - 24.0 lb.)
• [Middle Thick] (91.0 - 105.0 g/m
2
, 24.0 - 28.0 lb.)
• [Thick Paper 1] (106.0 - 169.0 g/m
2
, 28.0 - 45.0 lb.)
1. System Settings
28
To Next Page
Loading...
Need help?
General
