Parameter Value configured
Usable characters: ASCII 0x20-0x7e (8 to 63
bytes).
The default is blank.
eap {tls|ttls|leap|peap} {chap|mschap|
mschapv2|pap|md5|tls}
You can specify the EAP authentication type.
tls: EAP-TLS (default)
ttls: EAP-TTLS
leap: LEAP
peap: PEAP
chap, mschap, mschapv2, pap, md5, or tls are
settings for the phase 2 method, and must be set
when using EAP-TTLS or PEAP.
Do not make these settings when using other EAP
authentication types.
If you select EAP-TTLS, you can select chap,
mschap, mschapv2, pap, or md5.
If you select PEAP, you can select mschapv2 or
tls.
username “character string” You can specify the login user name for the
Radius server.
Usable characters: ASCII 0x20-0x7e (31
bytes).
The default is blank.
username2 “character string” You can specify the phase 2 username for EAP-
TTLS/PEAP phase 2 authentication.
Usable characters: ASCII 0x20-0x7e (31
bytes).
The default is blank.
domain “character string” You can specify the login domain name for the
Radius server.
The characters you can enter are ASCII
0x20-0x7e (31 bytes), but not “@” or “\”.
The default is blank.
password “character string” You can specify the login for the Radius server.
4. Monitoring and Configuring the Printer
198
To Next Page
Loading...
Need help?
General
