SNMP
Using the SNMP manager, you can get information about the machine.
The SNMP agent operating on UDP and IPX is incorporated into the built-in Ethernet board and optional
IEEE 802.11 interface unit of this machine.
This machine also supports SNMPv3, which increases user authentication, data encryption, and access
control security.
To encrypt communication by SNMPv3, you must specify the machine's encrypted password.
• If you changed the machine's community name, change the configuration of the connected computer
accordingly, using SNMP Setup Tool. For details, see SNMP Setup Tool Help.
The default community names are [public] and [admin]. You can get MIB information using these community
names.
Start SNMP Setup Tool
• Windows 2000:
Click the [Start] button.
Point to [SmartDeviceMonitor for Admin] on the [Programs] menu.
Click [SNMP Setup Tool].
• Windows XP/Vista, Windows Server 2003/2003 R2:
Click the [Start] button.
Point to [SmartDeviceMonitor for Admin] on the [All Programs] menu.
Click [SNMP Setup Tool].
Supported MIBs(SNMPv1/v2)
• MIB-II
• PrinterMIB
• HostResourceMIB
• IPv6-TCP-MIB
• IPv6-UDP-MIB
• IPv6-MIB
• IPv6-ICMP-MIB
• RicohPrivateMIB
• PRINTER-PORT-MONITOR-MIB
Supported MIBs(SNMPv3)
• MIB-II
4. Monitoring and Configuring the Printer
204
To Next Page
Loading...
Need help?
General
