7. Select the "Printer Job Authentication" level.
If you select [Entire] or [Simple (All)], proceed to "Selecting Entire or Simple (All)".
If you select [Simple (Limitation)], proceed to "Selecting Simple (Limitation)".
For a description of the printer job authentication levels, see "Printer Job Authentication".
• p.34 "Logging on Using Administrator Authentication"
• p.35 "Logging off Using Administrator Authentication"
• p.150 "Limiting Available Functions"
• p.47 "Selecting Entire or Simple (All)"
• p.48 "Selecting Simple (Limitation)"
• p.80 "Printer Job Authentication"
Selecting Entire or Simple (All)
If you select [Entire], you cannot print using a printer driver or a device that does not support authentication.
To print under an environment that does not support authentication, select [Simple (All)] or [Simple
(Limitation)].
If you select [Simple (All)], you can print even with unauthenticated printer drivers or devices. Specify this
setting if you want to print with a printer driver or device that cannot be identified by the machine or if you
do not require authentication for printing. However, note that, because the machine does not require
authentication in this case, it may be used by unauthorized users.
1. Press [Exit].
2. Press [OK].
3. Press the [User Tools/Counter] key.
Basic Authentication
47
To Next Page
Loading...
Need help?
General
