1. Press [On] for "Use Secure Connection (SSL)", and then press [OK].
To not use secure sockets layer (SSL) for authentication, press [Off].
2. Press the [User Tools/Counter] key.
Selecting Simple (Limitation)
If you select [Simple (Limitation)], you can specify clients for which printer job authentication is not required.
Specify [Parallel Interface: Simple], [USB: Simple] and the clients' IPv4 address range in which printer job
authentication is not required. Specify this setting if you want to print using unauthenticated printer drivers
or without any printer driver. Authentication is required for printing with non-specified devices.
If you select [Simple (Limitation)], you can print even with unauthenticated printer drivers or devices. Specify
this setting if you want to print with a printer driver or device that cannot be identified by the machine or if
you do not require authentication for printing. However, note that, because the machine does not require
authentication in this case, it may be used by unauthorized users.
1. Press [Simple (Limitation)].
3. Users/Authentication and its Application
78
To Next Page
Loading...
Need help?
General
